Tips for Tank Maintainance:

Step 1: Check to make sure your aquarium heater will be low enough in the water when you do your water change. If not, un-plug the heater, this will prevent your heater from cracking and you from possibly getting shocked. Unplug the fish tank filter and we also recommend unplugging the heater just to be safe. leave your fish in the tank as it causes too much stress to remove them. If you have any snails , remove them because you could easily harm them while you clean the gravel with the siphon.

Step 2: Using an algae pad, algae magnet, or algae scraper remove any algae that has accumulated on the glass. Do this before removing the water so that you can remove the floating algae particles with the siphon, preventing the aquarium algae from spreading too much.

Step 3: If the aquarium has plastic plants and ornaments and you wish to clean them then remove them. Soaking the plants is a plastic plant cleaner removes and difficult algae build up. This way the plants come out looking brand new and they won't get damaged. If you want to scrub the algae build up off with your fingers, this works fine too. Never wash them with soap because you will add phosphates in your water and cause an algae bloom! If you have live aquarium plants, do not remove them from your tank as you will up-root and could kill them or hinder their growth.

Step 4: Using a gravel cleaner that you have purchased from your local tropical fish store, remove 25 % of the water while cleaning the gravel. Be sure to siphon the gravel throughout the tank. If you have removed the aquarium ornaments, this will allow you to quickly siphon the gravel in the aquarium without removing too much water. We recommend removing the ornaments before siphoning, it makes it easier for you. If you have live plants, be careful when siphoning around the plants as not to disturb or tear the roots.

Step 5: Rinse the filter media in the dirty water that you just removed from your aquarium. Why? If the filter media is rinsed under tap water the beneficial bacteria will be killed from the chlorine in the tap water. Put the filter media back into the fish tank filter, but do not turn it on yet. Never change your filter at the same time you change the water because you will remove too much beneficial bacteria, reducing any natural biological filtration. This could easily shock your fish and can cause disease out break caused by too much stress.

Step 6: If you removed plants or decorations add them back into the aquarium and arrange as desired.

Step 7: Fill a bucket with tap water (don't forget to make sure the temperature is the same as your aquarium, test with your thermometer) and add water conditioner to remove the chlorine from the water. If you use salt in your fish tank, add the appropriate amount of salt for the amount of water that you removed from the tank, the instructions are on the bottle of aquarium salt.

Step 8: Fill the aquarium back up slowly as not to disturb the fish and to prevent the ornaments from floating about.

Step 9: Plug in the heater and plug in the filter. If you have a hang-on the back aquarium filter, you may need to place a few cups of water from the tank into the filter to get the motor siphoning up the water.

If you cannot find time to do the maintenance work for your aquarium, just give us a call or send us an enquiry. We will have one of our trained person to go to your place and do the needful. We are a New Delhi - NCR based Aquarium Services company and currently specialize in aquarium maintenance for New Delhi - NCR region only.